| FillHeight1 |
Lowest fill height for widening. Fills less than this height have no widening applied. |
| FillHeight2 |
Middle fill height for widening. Should be greater or equal to FillHeight1. |
| FillHeight3 |
Highest fill height for widening. Should be greater or equal to FillHeight2. |
| FillSlope1 |
Fill slope when height is less than FillHeight1. |
| FillSlope2 |
Fill slope when height is greater than FillHeight1 and less than FillHeight2. |
| FillSlope3 |
Fill slope when height is greater than
FillHeight2 and less than FillHeight3. |
| FillSlope4 |
Fill slope when height is greater than
FillHeight3. |
| CutSlope |
Cut Slope applied if component attachment
point is in cut. |
