|
|
| AcpThick |
Thickness of pavement in project units (feet or meters). |
| AcpThick2 |
Thickness of top (second) layer of pavement (may be zero). |
| AcpWidth |
Pavement surface width. |
| ShoulderWidth |
Shoulder width. This can be a horizontal tie feature. |
| ShoulderSlope |
Slope of shoulder. Crown or super is added to this slope. |
| Shoulder_V_Offset |
Vertical offset from top of asphalt to top of shoulder. |
| SubbaseThick |
Vertical offset from top of asphaltto top of shoulder. |
| SubbaseSlope |
Slope % of the sub-base layer (second layer above
subgrade). |
| BaseThick |
Thickness of base layer (first layer above sub-grade).
May be set to zero for two layer template. |
| BaseSlope |
Slope % of first layer above subgrade. |
| Curb_H |
Curb height at back (curb top adjusts to fit this height). |
| Curb_W |
Curb width (curb top adjusts to fit this width). |
| Curb_in_H |
Height of inside of curb. |
| CurbGutterW |
Gutter width (must be less than CURB_W) |
| CurbGutterSlp |
Gutter Slope (super elevation or crown is added to this value). |
| CurbRiserLen |
Slope length of first curb leg after gutter. |
| CurbRiserSlp |
Slope from gutter to top (super elevation or crown is added to this value). |
