|
|
| AcpThick |
Depth of pavement in project units (feet or meters). |
| AcpWidth |
Pavement surface width (horizontal distance).
This variable can be either a distance or horizontal tie. |
| SubbaseThick |
Depth of sub-base layer in project units (feet or meters). |
| SubbaseSlope |
Slope % of the sub-base layer. |
| BaseThick |
Depth % of the base measured from the bottom of the
sub-base. |
| BaseSlope |
Slope % of the base layer. |
| ShoulderSlope |
Slope % of shoulder. Crown or super is added to this slope. |
| Shoulder_V_Offset |
Vertical offset from top of asphalt to top of shoulder (should be positive).
NOTE: This value should be less than AcpThick. |
| Shoulder_H_Offset |
Offset from CL to shoulder. Must be greater than or equal to
AcpWidth. This variable can be either a distance or horizontal
tie. |
|
|
