Default Ditch Component

Description
This component creates a flat bottom or V bottom ditch. 

Dialog Parameters

Depth

Depth of ditch measured from edge of the attachment point (road edge at sub-grade) to the bottom of ditch.

Slope%

If Auto is selected, the ditch slopes will be determined from the ground type.

Width

Width of a ditch measured at the bottom. A width of 0 will yield a triangular shaped ditch.

AutoCalc, Include, Exclude

The ditch will be automatically included if the closest road edge is below the original ground and will be excluded if it is above. If Include is set the ditch will be always included. Similarly if Exclude is set the ditch will be always excluded.

Override Parameters