| TopDX |
Offset distance (HD) from connection point to top / inside of the slope. |
| TopSlp |
Slope from connection point to top of the slope. |
| MidDY |
Vertical height of the middle section. |
| MidSlp |
Slope of middle section. |
| ClosingSlp |
Closing slope. |
| FillSlope3 |
Fill slope when height is greater than
FillHeight2 and less than FillHeight3. |
| FillSlope4 |
Fill slope when height is greater than
FillHeight3. |
| CutSlope |
Cut Slope applied if component attachment
point is in cut. |
