| AcpThick |
Thickness of pavement in project units (feet or meters). |
| AcpWidth |
Pavement surface width. This can be a horizontal tie feature. |
| ShoulderWidth |
Shoulder width. |
| ShoulderSlope |
Slope of shoulder. Crown or super is added to this slope. |
| ShoulderThick |
Thickness of material under the shoulder. NOTE the shoulder base must tie into the sub-base layer. |
| SubbaseThick |
Vertical thickness of the subbase. |
| SubbaseSlope |
Slope % of the subbase layer. At present this must be vertical. |
| Subbase_Hoffset |
Horizontal offset from outside of sub-base to outside of pavement layers. |
| BaseThick |
Thickness of base layer (first layer above sub-grade).
May be set to zero for two layer template. |
| BaseSlope |
Slope % of the base (first layer above
subgrade). |
| BaseHoffset |
Horizontal offset from outside of base to outside of sub-base layers. |
| SodWidth |
Additional shoulder width. |
