MOF End Haul Appraisal Component

This component produces a minimum volume full bench cut in an end haul situation (where the alignment is below ground on a side hill).

MOF End Haul Appraisal Component

MaxDaylight	Max distance from alignment to daylight (template does nothing if no daylight within this distance)
RdWidth	Road width total (ditch to daylight)
DitchSlope	Slope from road to bottom of ditch
DitchDepth	Ditch depth
DitchWidth	Ditch width at bottom
CutSlope	Cut Slope (from bottom of ditch to daylight)

Typical application 1. Design the road as you wish to build it (with or without horizontal alignment) using a realistic template. This will define the profile of the road and give you realistic volumes and cross sections (below). 2 Save the design under a new name and assign a template created with the MOF End Haul Appraisal component to the end haul sections (below). This will give you MOF appraisal volumes and cross sections without any need to adjust the alignment.

For more information contact us at mail@softree.com.