Ditch by Fill Height

Description
Creates a ditch when the height of fill is less than a user specified height (DitchMaxFillHt).

Parameters


DitchDepth	Depth of the ditch measured from the edge of sub-grade(vertical distance).
DitchSlp	Ditch slope from the attachment point (edge of road) to bottom of ditch.
DitchBotWd	Width of the bottom of the ditch (horizontal distance).
DtchBotSlp	Slope of the bottom of the ditch.
DitchMaxFillHt	Maximum height of fill above subgrade. Fills greater than this will not have a ditch. This variable should always be less than or equal DitchDepth.
DitchSurfDepth	Surfacing Depth of ditch or armour material. Set to 0 if no surfacing.

For more information contact us at mail@softree.com.